Tube Clamps (similar to Stauff® Clamps)

Single Tube Clamps – Standard Range (Mild Steel & Weld Base Plate)

The standard clamps are manufactured from polypropylene to DIN 3015 and have an operating temperature range from -30?C to + 90?C. The complete clamp is made up from the following:

• 1 x Pair of Jaws (Polypropylene)
• 1 x Cover Plate (top plate)
• 1 x Weld Plate (bottom plate)*
• 2 x Hex Head Bolts

---

Note* – The standard COMPLETE clamp has a weld plate as the base plate; this is designed to be welded flat to a panel or piece of metalwork.

Single Tube Clamps – Standard Range (Mild Steel & Weld Base Plate)

Click to enlarge

 

 

Twin Tube Clamps – Standard Range (Mild Steel & Weld Base Plate)

They are manufactured to DIN 3015 and have an operating temperature range from -30?C to + 90?C. The complete clamp is made up from the following:

• 1 x Pair of Jaws (Polypropylene)
• 1 x Cover Plate (top plate)
• 1 x Weld Plate (bottom plate)
• 2 x Hex Head Bolts

Twin Tube Clamps – Standard Range (Mild Steel & Weld Base Plate)

Click to enlarge

 

Other base plate options are:-

Extended Weld Plate – these extend past the sides of the jaws on the clamp and have two holes to allow the user to screw into a wall (for example)

 

Uni-Strut and Rail Nuts – these allow the user to fit uni-strut to the wall then replace the need for a base plate with a Rail Nut. This solution reduces the number of holes needed to be drilled and makes a very tidy way of securing multi tube runs (for example gas lines into a laboratory).

The uni-strut mounting rail is supplied in 1 or 2 meter lengths.

If you want to stack clamps then you require Stacking Bolts to bolt the clamps together. We would also recommend using Locking Plates if stacking the clamps to ensure that all of the bolts don’t loosen if you want to remove one clamp.

Jaws are available in Aluminium, rubber or Polyamide for use in high temperature applications and where polypropylene is not suitable.

The standard bolts are hex head, but can also be slotted screw or allen key versions.

Base and cover plates are also available in Stainless Steel