Pressure Tech – Analyser & Instrumentation Regulators

• Solid disk seat design
• Lightweight and compact design
• Low decaying pressure effect
• PCTFE-lined diaphragm
• Max. Inlet: 414 bar (6,000 psi)

For further details, please download the LF-240 Low-Flow Pressure Regulator (Outlet to 10bar)

  product overview brochure – HERE

• Large sensitive elastomeric diaghragm
• Lightweight and compact design
• Low decaying pressure effect
• PCTFE-lined diaghragm
• Max. Inlet: 230 bar (3,350 psi)

For further details please download the LF-230 Low-Flow Pressure Regulator (Outlet to 10bar)  product overview brochure – HERE 

• Inconel® X750 diaphragm
• 316SS threaded bonnet
• Solid disk seat design
• Max inlet: 414bar (6,000 psi)
• 40 micron inlet filter
• Lightweight compact design
• High accuracy

For further details please download the LF-310 Low Flow Regulator (Outlet to 35bar)  product overview brochure – HERE

• Piston sensing element
• Optional adjustment methods
• Max inlet: 300bar (4350psi)
• Compact design
• Two sensor sizes cover 1bar to 100bar
• FPM O Rings
• Low flow: Cv 0.06
• 316SS threaded bonnet

For further details please download the MINI300 Low Flow Regulator (Outlet to 100bar)  product overview brochure – HERE

• Max 550bar inlet
• Excellent sensitivity to 414bar outlet
• 25mm or 12mm sensors
• None venting or self venting – none captured
• Optional cylinder regulator assembly

For further details please download the LF-540 Low Flow Regulator (Outlet to 414 bar)  product overview brochure – HERE

• Metal-to-metal seating diaghragm
• Solid disk seat design
• No elastomeric seals
• -60 to +200c temperature range
• 0.04% decaying pressure effect
• ‘Interstage’ relief valve option
• 40 micron inlet filter
• Max. Inlet: 414 bar (6,000 psi)

For further details please download the TS-310 Two Stage Regulator (Outlet to 25 bar)  product overview brochure – HERE

• Metal-to-metal seating diaghragm
• Max. Inlet: 414 bar (6,000 psi)
• Solid disk seat design
• No elastomeric seals
• -60 to +200c temperature range
• 0.04% decaying pressure effect
• ‘Interstage’ relief valve option
• 40 micron inlet filter

For further details please download the TS-311 Two-Stage Regulator (Outlet to 20bar)  product overview brochure – HERE

• ATEX / IECEx certified for use in hazardous areas
• Alternative materials available
• Compact design
• Optional 115V or 230V power supply

For further details please download the XHM300 Heated Block Manifold  product overview brochure – HERE

• 2 x 100W heater cartridges
• ATEX / IECEX certified
• Inconel® X750 diaphragm
• Optional entry points for cable supply
• Max. Inlet: 414bar (6,000psi) 

For further details please download the XHR310 Dual-Heated Pressure Regulator (Outlet to 35bar)  product overview brochure – HERE

• 2 x 100W heater cartridges to maintain sample gases in their vapour state
• ATEX and IECEx certified for use in category 2 zone 1 hazardous areas
• Piston sensing element
• Optional entry points for cable supply
• Max. Inlet: 414bar (6,000psi)

For further details please download the XHR311 Dual-Heated Regulator (Outlet to 150bar)  product overview brochure – HERE

• Side-entry or in-line options
• 1 x 100W heater cartridge
• ATEX / IECEX certified
• Electrical enclosure meets requirements of IP66 / NEMA 4
• Inconel® X750 diaphragm

For further details please download the XHS310 (Outlet to 35bar)  product overview brochure – HERE

• Side-entry or in-line heater cartridge position options
• 100W heater cartridge
• ATEX / IECEX certified
• Piston sensing element
• Max. Inlet: 414bar (6,000psi)

For further details please download the XHS311 Single-Heated Pressure Regulator (Outlet to 150bar)  product overview brochure – HERE