The Spec-Master nickel plated brass regulators with stainless steel diaphragms are specifically designed to control high pressure high purity (up to grade 6.0) gases providing accurate outlet pressure control. 

They are typically use on pipeline systems for speciality gas control applications throughout laboratory, research and development, analytical facilities and many industries.


 

 

HPS600-SeriesSpec Master Single Stage Cylinder Regulator (HPS600 Series)

The Spec Master HPS600 Series single stage diaphragm cylinder regulators are designed for primary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) in applications where slight variation in outlet pressure is acceptable as cylinder pressure decreases.

Features

  • Six Port Configurations
  • Front & Rear Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – Nickel Plated Brass Barstock
  • Bonnet – Nickel Plated Brass Barstock
  • Diaphragm – 316L Stainless Steel
  • Seal – PTFE
  • Seat – PTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure 60 bar / 300 bar
  • Outlet Pressure – 0-1.5 bar; 0-3.5 bar; 0-6 bar; 0-10 bar
  • Gauges – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range – -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight – 1.2 kg

How to order

HPS600-How-to-OrderClick to enlarge

Catalogue

 For ordering information and further details on the full range please download the overview brochure – HERE


 

HPS620-SeriesSpec Master Single Stage High Pressure Cylinder Regulator (HPS620 Series)

The Spec Master HPS620 Series single stage high pressure piston cylinder regulators are designed for primary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) in applications where slight variation in outlet pressure is acceptable as cylinder pressure decreases.

 

HPS621 Series – FKM Seals

HPS622 Series – EPDM Seals

Features

  • Six Port Configurations
  • Front & Rear Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – Nickel Plated Brass Barstock
  • Bonnet  – Nickel Plated Brass Barstock
  • Piston – Brass
  • Seal – FKM / EPDM
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure – 60 bar / 300 bar
  • Outlet Pressure  – 0-20 bar; 0-50 bar; 0-100 bar; 0-200 bar; 0-250 bar
  • Gauges – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range – -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight – 1.4kg

How to order

HPS620-orderingClick to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE  


 

 

HPT600-SeriesSpec Master Two Stage Cylinder Regulator (HPT600 Series)

The Spec Master HPT600 Series two stage diaphragm cylinder regulators are designed for primary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) in applications where constant delivery pressure is required as the cylinder pressure decreases.

HPT601 Series – FFKM Pressure Relief Valve, FKM Seal

HPT602 Series – FFKM Pressure Relief Valve, EPDM Seal

 

Features

  • Six Port Configurations
  • Front Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – Nickel Plated Brass Barstock
  • Bonnet – Nickel Plated Brass Barstock
  • Diaphragm – 316L Stainless Steel
  • Seal – PTFE
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure -60 bar / 300 bar
  • Outlet Pressure – 0-1.5 bar; 0-3.5 bar; 0-6 bar; 0-10 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range – -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.079
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 2.0 kg

How to order

HPT600-How-to-OrderClick to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE


 

 

HPT620Spec Master Two Stage High Pressure Cylinder Regulator (HPT620 Series)

The Spec Master HPT620 Series two stage high pressure piston cylinder regulators are designed for primary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) in applications where slight variation in outlet pressure is acceptable as cylinder pressure decreases.

HPT621 Series – FKM Seals

HPT622 Series – EPDM Seals

Features

  • Six Port Configurations
  • Front Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – Nickel Plated Brass Barstock
  • Bonnet – Nickel Plated Brass Barstock
  • Piston – Brass
  • Seal – FKM / EPDM
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure – 300 bar
  • Outlet Pressure  – 0-20 bar; 0-50 bar
  • Gauges  – 50mm Diameter
  • Ports –   ¼” NPT Female
  • Temperature Range – -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.079
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 2.0kg

How to order

HPT600-How-to-OrderClick to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE


 

 

HPL600-Series

Spec Master Single Stage Line Regulator (HPL600 Series)

The Spec Master HPL600 Series single stage diaphragm line regulators are designed for secondary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) on gas distribution systems.

 

Features

  • Four Port Configurations
  • Front & Rear Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – Nickel Plated Brass Barstock
  • Bonnet – Nickel Plated Brass Barstock
  • Diaphragm – 316L Stainless Steel
  • Seal – PTFE
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure – 207 bar
  • Outlet Pressure  – 0-1.5 bar; 0-3.5 bar; 0-6 bar; 0-10 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range – -20°C to + 60°C
  • Flow Coefficient (Cv)- 0.1
  • Helium Leak Integrity -1 x 10?9 mbar l/s
  • Weight  – 1.1 kg

How to order

HPL600-how-to-orderClick to enlarge

Catalogue

 For ordering information and further details on the full range please download the overview brochure – HERE


 

 

HPL620

Spec Master Single Stage High Pressure Line Regulator (HPL620 Series)

The Spec Master HPL620 Series single stage high pressure piston line regulators are designed for secondary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) on gas distribution systems.

HPL621 Series – FKM Seal

HPL622 Series – EPDM Seal

Features

  • Four Port Configurations
  • Front & Rear Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – Nickel Plated Brass Barstock
  • Bonnet – Nickel Plated Brass Barstock
  • Piston – Brass
  • Seal – FKM/EPDM
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

 

Specification

  • Maximum Inlet Pressure -300 bar
  • Outlet Pressure  – 0-20 bar; 0-50 bar; 0-100 bar; 0-200 bar; 0-250 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 1.4 kg

How to order

HPL620-How-to-orderClick to enlarge

Catalogue

 For ordering information and further details on the full range please download the overview brochure – HERE


 

 

HPC6000Spec Master Single Stage Wall Mounted Point of Use Regulator (HPC6000 Series)

The Spec Master HPC6000 Series single stage diaphragm point of use regulators are designed for secondary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) on gas distribution systems.

HPC6001 Series – FKM Seals

HPC6002 Series – EPDM Seals

Features

  • Isolation Valve
  • Non-Return Valve
  • Encapsulated Seat Design
  • Full Range of Inlet & Outlet Fittings
  • Wall Mounting

Materials

  • Body – Nickel Plated Brass Barstock
  • Bonnet – Nickel Plated Brass Barstock
  • Diaphragm – 316L Stainless Steel
  • Seal – PTFE
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel
  •  

Specification

  • Maximum Inlet Pressure – 207 bar
  • Outlet Pressure  – 0-1.5 bar; 0-3.5 bar; 0-6 bar; 0-10 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 2.05 kg

How to order

HPC6000-how-to-orderClick to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE


 

 

HPC6200Spec Master Single Stage High Pressure Wall Mounted Point of Use Regulator (HPC6200 Series)

The Spec Master HPC6200 Series single stage high pressure piston point of use regulators are designed for secondary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) on gas distribution systems.

HPC6201 Series – FKM Seals

HPC6202 Series – EPDM Seals

Features

  • Isolation Valve
  • Non-Return Valve
  • Encapsulated Seat Design
  • Full Range of Inlet & Outlet Fittings
  • Wall Mounting

Materials

  • Body – Nickel Plated Brass Barstock
  • Bonnet – Nickel Plated Brass Barstock
  • Piston – Brass
  • Seal – FKM / EPDM
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

 

Specification

  • Maximum Inlet Pressure – 300 bar
  • Outlet Pressure  – 0-20 bar; 0-50 bar; 0-100 bar; 0-200 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 2.05 kg

How to order

HPC6200-OrderingClick to enlarge

Catalogue

 For ordering information and further details on the full range please download the overview brochure – HERE


 

 

Spec Master Diaphragm Outlet Points  (HPU6300 Series)

Series diaphragm outlet points are designed for secondary pressure gas control of non-corrosive or toxic, high purity gases up to grade 6.0 purity (99.9999%), on gas distribution systems at the point of user control.

HPU6302 Series – Wall Mounting, 1/4 NPT Female Inlet, EPDM Seal

HPU6312 Series – Bench Mounting, 1/4 NPT Female Inlet, EPDM Seal

HPU6322 Series – Rear Mounting, 1/4 NPT Female Inlet, EPDM Seal

Features

  • Ergonomic compact design
  • Range of wall and bench mounting options
  • Fully interchangeable within existing installations
  • Pressure regulator with integrated shut-off function on both the inlet and the outlet

Materials

  • Body – Brass Chrome Plated
  • Diaphragm – Hastelloy C
  • Shut-off Valve Seat – PCTFE
  • Seat – EPDM
  • Filter – 316L Stainless Steel
  • Regulator Seal – PVDF

 

Specification

  • Maximum Inlet Pressure – 40 bar (580 PSI)
  • Delivery Pressure Range – 1.5 bar (22 PSI) – 3.5 bar (50 PSI) – 6 bar (90 PSI) – 10 bar (150 PSI)
  • Inlet Ports – 1/4″ NPT Female
  • Outlet Ports – 1/4″ NPT Female
  • Temperature Range – -25° C to +70° C (-13° F to +160° F)
  • Weight – 0.64 kg maximum

How to order

Click to enlarge

Catalogue

 For ordering information and further details on the full range please download the overview brochure – HERE