Pipeline Outlet Point
FTI offer a full range of Gas-Arc Outlet Point Regulators. The Lab-Master range is suitable for gas purity 5.0 (99.999%); the Spec-Master for gases of 6.0 (99.9999%) and the full stainless steel Chem-Master for corrosive and toxic gases of 6.0 (99.9999%) purity. 
Lab-Master Pipeline Outlet Point
Specifications
- Wall / bench or duct mounting
- Diaphragm – 316L Stainless Steel
- Integral non return valve
- ¼ turn isolation valve
- ¼” NPT inlet and outlet
- Filter – 316L sintered Stainless Steel
- Flash back arrestor kit available
- Single stage regulator
- Maximum 20 bar inlet
- Outlet 0-2; 0-4 and 0-12 bar
- Body – nickel plated brass
- Compliant with BCGA code of practice CP4 & CP6
- External inlet available for bench mount version
Product Features
Lab-Master Pipeline Outlet Points and Regulators are specifically designed to control low pressure pipeline high purity (up to grade 5.0) gases providing accurate outlet pressure control at the point of use. Typically used on pipeline systems for speciality gas control applications throughout laboratory, research and development, analytical facilities and many industries. Available in Bench Mount, Wall Mount and Duct Mount versions, each with a range of outlet pressures; 0-2, 0-4 and 0-12 bar.
Catalogue
For further details please download the Gas-Arc Lab-Master Pipeline Outlet Point product overview brochure – HERE Spec-Master Inline Outlet Point
Specifications
- Inlet diaphragm isolation valve
- Integral non return valve
- Inlet ¼” NPT female
- Outlet ¼” NPT female
- Single stage
- Filter – 316L sintered stainless steel
- Stainless steel mounting bracket
- Body – nickel plated brass
- Valve seat – nylon
- Regulator diaphragm – 316L stainless steel
- Valve diaphragm – 316L stainless steel
- Inlet pressure – maximum 40 bar
- Outlet pressure – 0-1.5; 0-3.5; 0-6 & 0-10 bar
- Low wetted surface area for minimum purge requirements
Product Features
Designed for the secondary pressure regulation of high purity (up to grade 6.0) gases to a stable outlet pressure, the Spec-Master range of nickel plated brass inline outlet points comply with current standards and BCGA Codes of Practice, and are ideally suited to gas pressure regulation at the point of use in laboratory, research and development, analytical facilities and many industries.
Catalogue
For further details please download the Spec-Master Inline Outlet Point product overview brochure – HERE Chem-Master Inline Outlet Point
Specifications
- Inlet diaphragm isolation valve
- Integral non return valve
- Stainless steel mounting bracket
- Outlet ¼” NPT female
- Inlet ¼” NPT female
- Inlet pressure – maximum 40 bar
- Single stage
- Body – 316L stainless steel
- Valve seat – PCTFE
- Regulator diaphragm – 316L stainless steel
- Valve diaphragm – 316L stainless steel
- Filter – 316L sintered stainless steel
- Outlet pressure – 0-1.5; 0-3.5; 0-6 & 0-10 bar
- Low wetted surface area for minimum purge requirements
Product Features
Designed for the secondary regulation of both high or low cylinder pressure corrosive gases, toxic or high purity (up to grade 6.0) gases to a stable outlet pressure, the Chem-Master range of stainless steel inline outlet points are ideally suited to gas pressure regulation at the point of use in laboratory, research and development, analytical facilities and many industries.
Catalogue
For further details please download the Chem-Master Inline Outlet Point product overview brochure – HERE