The Chem Master stainless steel regulators  are specifically designed to control high pressure, high purity (up to grade 6.0) toxic and corrosive gases providing accurate outlet pressure control. 

They are typically use on pipeline systems for speciality gas control applications throughout laboratory, research and development, analytical facilities and many industries.


 

Chem Master Single Stage Cylinder Regulator Chem Master Single Stage Cylinder Regulator (SGS600 Series)

The Chem Master SGS600 Series single stage diaphragm cylinder regulators are designed for primary pressure gas control of corrosive, toxic or high purity gases up to grade 6.0 (99.9999%) in applications where slight variation in outlet pressure is acceptable as cylinder pressure decreases.

Features

  • Six Port Configurations
  • Front & Rear Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body -316L Stainless Steel
  • Bonnet – Nickel Plated Brass Barstock
  • Diaphragm – 316L Stainless Steel
  • Seal – PTFE
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure – 60 bar / 300 bar
  • Outlet Pressure  – 0-1.5 bar; 0-3.5 bar; 0-6 bar; 0-10 bar
  • Gauges  – 50mm Diameter
  • Ports –   ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 1.2 kg

How to order

SGS600orderingClick to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE


Chem Master Single Stage High Pressure Regulators (SGS620 Series)

Chem Master Single Stage High Pressure Cylinder Regulator

The Chem Master SGS620 Series single stage high pressure piston cylinder regulators are designed for primary pressure gas control of corrosive, toxic or high purity gases up to grade 6.0 (99.9999%) in applications where slight variation in outlet pressure is acceptable as cylinder pressure decreases.

 

SGS621 Series – FKM Seals

SGS622 Series – EPDM Seals

Features

  • Six Port Configurations
  • Front & Rear Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – 316L Stainless Steel
  • Bonnet – Nickel Plated Brass Barstock
  • Piston – Stainless Steel
  • Seal – FKM / EPDM
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

 

Specification

  • Maximum Inlet Pressure – 60 bar / 300 bar
  • Outlet Pressure  – 0-20 bar; 0-50 bar; 0-100 bar; 0-200 bar; 0-250 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity -1 x 10?9 mbar l/s
  • Weight  – 1.4kg

How to order

SGS620-orderingClick to enlarge

Catalogue

 For ordering information and further details on the full range please download the overview brochure – HERE


>

SGT600-SeriesChem Master Two Stage Cylinder Regulator (SGT600 Series)

The Chem Master SGT600 Series two stage diaphragm cylinder regulators are designed for primary pressure gas control of corrosive, toxic or high purity gases up to grade 6.0 (99.9999%) in applications where constant delivery pressure is required as the cylinder pressure decreases.

 

SGT601 Series – FFKM Pressure Relief Valve, FKM Seal

SGT602 Series – FFKM Pressure Relief Valve, EPDM Seal

Features

  • Six Port Configurations
  • Front Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – 316L Stainless Steel
  • Bonnet – Nickel Plated Brass Barstock
  • Diaphragm – 316L Stainless Steel
  • Seal –FKM/EPDM
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure – 60 bar / 300 bar
  • Outlet Pressure  – 0-1.5 bar; 0-3.5 bar; 0-6 bar; 0-10 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.079
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 2.0 kg

How to order

SGT600-orderingClick to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE


>

Chem Master Two Stage Cylinder Regulator (SGT600 Series)Chem Master Two Stage High Pressure Cylinder Regulator (SGT620 Series)

The Chem Master SGT620 Series two stage high pressure piston cylinder regulators are designed for primary pressure gas control of corrosive, toxic or high purity gases up to grade 6.0 (99.9999%) in applications where slight variation in outlet pressure is acceptable as cylinder pressure decreases.

SGT621 Series – FKM Seals

SGT622 Series – EPDM Seals

Features

  • Six Port Configurations
  • Front Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – 316L Stainless Steel
  • Bonnet – Nickel Plated Brass Barstock
  • Piston – Stainless Steel
  • Seal – FKM / EPDM
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure – 300 bar
  • Outlet Pressure  – 0-20 bar; 0-50 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.079
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 2.0kg

How to order

SGT620-orderingClick to enlarge

Catalogue

 For ordering information and further details on the full range please download the overview brochure – HERE


 

SPL600Chem Master Single Stage Line Regulator (SGL600 Series)

The Chem Master SGL600 Series single stage diaphragm line regulators are designed for secondary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) on gas distribution systems.

 

Features

  • Four Port Configurations
  • Front & Rear Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – 316L Stainless Steel
  • Bonnet – Nickel Plated Brass Barstock
  • Diaphragm – 316L Stainless Steel
  • Seal – PTFE
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

 

Specification

  • Maximum Inlet Pressure – 207 bar
  • Outlet Pressure  – 0-1.5 bar; 0-3.5 bar; 0-6 bar; 0-10 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 1.1 kg

How to order

SGL600-orderingClick to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE


 

Chem Master Single Stage High Pressure Line Regulator (HPL620 Series)Chem Master Single Stage High Pressure Line Regulator (SPL620 Series)

The Chem Master SPL620 Series single stage high pressure piston line regulators are designed for secondary pressure gas control of non-corrosive or non-toxic high purity gases up to grade 6.0 (99.9999%) on gas distribution systems.

SGL621 Series – FKM Seal

SGL622 Series – EPDM Seal

Features

  • Four Port Configurations
  • Front & Rear Panel Mounting Capabilities
  • Encapsulated Seat Design
  • Low Wetted Surface Area
  • Full Range of Inlet & Outlet Fittings
  • Side Entry

Materials

  • Body – 316L Stainless Steel
  • Bonnet – Nickel Plated Brass Barstock
  • Piston – 316L Stainless Steel
  • Seal – FKM/EPDM
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure – 300 bar
  • Outlet Pressure  – 0-20 bar; 0-50 bar; 0-100 bar; 0-200 bar; 0-250 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 1.4 kg

How to order

SGL620orderingClick to enlarge

Catalogue

 For ordering information and further details on the full range please download the overview brochure –HERE


 

SGC6000-SeriesChem Master Single Stage Wall Mounted Point of Use Regulator (SGC6000 Series)

The Chem Master SGC6000 Series single stage diaphragm wall mounted  point of use regulators are designed for secondary pressure gas control of corrosive, toxic or high purity gases up to grade 6.0 (99.9999%) on gas distribution systems.

SGC6001 Series – FKM Seals

SGC6002 Series – EPDM Seals

Features

  • Isolation Valve
  • Non-Return Valve
  • Encapsulated Seat Design
  • Full Range of Inlet & Outlet Fittings
  • Wall Mounting

 

Materials

  • Body – 316L Stainless Steel
  • Bonnet – Nickel Plated Brass Barstock
  • Diaphragm – 316L Stainless Steel
  • Seal – PTFE
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure – 207 bar
  • Outlet Pressure  – 0-1.5 bar; 0-3.5 bar; 0-6 bar; 0-10 bar
  • Gauges  – 50mm Diameter
  • Ports – ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 2.05 kg

How to order

SGC6000-orderingClick to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE


 

Chem Master Single Stage High Pressure Wall Mounted Point of Use Regulator (SGC6200 Series)Chem Master Single Stage High Pressure Wall Mounted Point of Use Regulator (SGC6200 Series)

The Chem Master SGC6200 Series single stage high pressure piston point of use regulators are designed for secondary pressure gas control of corrosive, toxic or high purity gases up to grade 6.0 (99.9999%) on gas distribution systems.

SGC6201 Series – FKM Seals

SGC6202 Series – EPDM Seals

Features

  • Isolation Valve
  • Non-Return Valve
  • Encapsulated Seat Design
  • Full Range of Inlet & Outlet Fittings
  • Wall Mounting

Materials

  • Body – 316L Stainless Steel
  • Bonnet – Nickel Plated Brass Barstock
  • Piston – 316L Stainless Steel
  • Seal – FKM / EPDM
  • Seat – PCTFE
  • Filter – 10 Micron 316L Stainless Steel

Specification

  • Maximum Inlet Pressure – 300 bar
  • Outlet Pressure  – 0-20 bar; 0-50 bar; 0-100 bar; 0-200 bar
  • Gauges  – 50mm Diameter
  • Ports –   ¼” NPT Female
  • Temperature Range –  -20°C to + 60°C
  • Flow Coefficient (Cv) – 0.1
  • Helium Leak Integrity – 1 x 10?9 mbar l/s
  • Weight  – 2.05 kg

How to order

SGC6200-orderingClick to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE


 

Chem Master Diaphragm Outlet Points (SGU6300 Series)

Series diaphragm outlet points are designed for secondary pressure gas control of corrosive, toxic and high purity gases up to grade 6.0 purity (99.9999%), on gas distribution systems at the point of user control.

SGU6301 Series – Wall Mounting, 1/4 NPT Female Inlet, FKM Seal

SGU6302 Series – Wall Mounting, 1/4 NPT Female Inlet, EPDM Seal

SGU6311 Series – Bench Mounting, 1/4 NPT Female Inlet, FKM Seal

SGU6312 Series – Bench Mounting, 1/4 NPT Female Inlet, EPDM Seal

SGU6321 Series – Rear Mounting 1/4 NPT Female Inlet, FKM Seal

SGU6322 Series – Rear Mounting 1/4 NPT Female Inlet, EPDM Seal

Features

  • Ergonomic compact design
  • Range of wall and bench mounting options
  • Fully interchangeable within existing installations
  • Pressure regulator with integrated shut-off function on both the inlet and the outlet

Materials

  • Body – Stainless Steel
  • Diaphragm – Hastelloy C
  • Shut-off Valve Seat – PCTFE
  • Seat – FKM / EPDM
  • Filter – 316L Stainless Steel
  • Regulator Seal – PCTFE

Specification

  • Maximum Inlet Pressure – 40 bar (580 PSI)
  • Delivery Pressure Range – 1.5 bar (22 PSI); 3.5 bar (50 PSI); 6 bar (90 PSI); 10 bar (150 PSI)
  • Inlet Ports – 1/4″ NPT Female
  • Outlet Ports – 1/4″ NPT Female
  • Temperature Range – -25° C to +70° C (-13° F to +160° F)
  • Weight – 0.64 kg maximum

How to order

Click to enlarge

Catalogue

For ordering information and further details on the full range please download the overview brochure – HERE