FTI have partnered with an independent family run British specialty gases company, to supply Special Gases, Calibration Gases and Gas Mixes.
We aim to offer a fast, competitive and flexible solution to your gas requirements, as well as all the complimentary gas delivery equipment required. We offer gravimetrically produced, high precision calibration gas mixtures conforming to ISO 6142, along with a range of high purity gases and pressure control equipment, used for instrumental analysis and gas detection applications.
We can supply you with high quality gas mixtures for a wide range of applications including Environmental Monitoring, Gas Detection, Laser Cutting, and Laboratory Analysis. Our gas mixtures are used in the Oil, Gas and Petrochemical industries.
Choose from our range of Non-refillable Cylinders (NRCs) and High Pressure Cylinders (HPCs) below:
High Pressure Cylinders
| Code | Gas Vol | Gas Vol | Height | Diameter | Material | Valve |
| 120 ALU | 112 lts | 70 bar | 365 mm | 90 mm | Aluminium | C10 |
| 103 ST | 103 lts | 70 bar | 365 mm | 83 mm | Steel | C10 |
| 60 ALU | 60 lts | 34 bar | 365 mm | 90 mm | Aluminium | C10 |
| 34 ST | 34 lts | 34 bar | 279 mm | 74 mm | Steel | CGA600 |
| 34 ALU | 34 lts | 34 bar | 285 mm | 76 mm | Aluminium | C10 |
| 12 ALU | 12 lts | 12 bar | 250 mm | 78 mm | Aluminium | Threaded |
Non-Refillable Cylinders
| Code | Water Vol | Water Vol | Height | Diameter | Material | Valve | Nominal Gas Vol |
| 50 ALU | 50 lts | 150 bar | 1520 mm | 230 mm | Aluminium | BS/DIN/CGA | 7.5m³ |
| 50 ST | 50 lts | 150 bar | 1520 mm | 230 mm | Steel | BS/DIN/CGA | 7.5m³ |
| 20 ALU | 20 lts | 150 bar | 990 mm | 200 mm | Aluminium | BS/DIN/CGA | 3.0m³ |
| 20 ST | 20 lts | 150 bar | 835 mm | 200 mm | Steel | BS/DIN/CGA | 3.0m³ |
| 10 ALU | 10 lts | 150 bar | 700 mm | 175 mm | Aluminium | BS/DIN/CGA | 1.5m³ |
| 10 ST | 10 lts | 150 bar | 690 mm | 160 mm | Steel | BS/DIN/CGA | 1.5m³ |
| 5 ALU | 5 lts | 150 bar | 505 mm | 150 mm | Aluminium | BS/DIN/CGA | 0.75m³ |
| 5 ST | 5 lts | 150 bar | 480 mm | 140 mm | Steel | BS/DIN/CGA | 0.75m³ |
| Code | Water vol | Water vol | Height | Diameter | Matieral | Valve | Datasheet |
| 1 ALU | 1 lts | 12 bar | 250 mm | 78 mm | Aluminium | Threaded | 12ltr NRF Cylinder |
| 0.85 ALU | 0.85 lts | 34 bar | 285 mm | 76 mm | Aluminium | C10 | 34ltr NRF Cylinder |
| 0.85 ST | 0.85 lts | 34 bar | 279 mm | 74 mm | Steel | CGA600 | 34ltr Steel NRF Cylinder |
| 1.6 ALU | 1.6 lts | 34 bar | 365 mm | 90 mm | Aluminium | C10 | 60 lts NRF Cylinder |
| 1.6 ST | 1.6 lts | 70 bar | 356 mm | 83 mm | Steel | C10 | 103ltr Steel NRF Cylinder |
| 1.6 ALU | 1.6 lts | 70 bar | 365 mm | 90 mm | Aluminium | C10 | 112Ltr NRF Cylinder |
Popular Mixes by Industry
Biological growth control
- Carbon dioxide / Hydrogen in Nitrogen
- Carbon dioxide in Nitrogen
- Carbon dioxide in Oxygen
BTEX calibration
- Benzene
- Ethyl benzene
- Toluene
- Xylene
FID Fuel
- Hydrogen in Helium
- Flammable gas mixtures
- Methane in Air
- Ethane in Air
- Propane in Air
- Iso-Butane in Air
- N-Pentane in Air
- Hydrogen in Air
Food Packaging
Carbon dioxide in Nitrogen.
Gas Detection
Hydrogen sulphide, Carbon Monoxide, Methane, and Oxygen in Nitrogen.
Pure Gas List
R – Numbers are under Halocarbons** Please specify name and formula.
- Acetylene
- Air
- Allene
- Ammonia
- Argon
- Boron Trichloride
- Butane
- Butene 1
- Butene Cis 2
- Butene Trans 2
- 1.3. Butadiene
- Carbon Dioxide
- Carbon Monoxide
- Carbonyl Sulphide
- Chlorine
- Cyclopropane
- Deuterium
- Dimethylamine
- Dimethyl Ether
- Ethane
- Ethyl Aceylene
- Ethyl Chloride
- Ethylene
- Helium
- Hydrogen
- Hydrogen Bromide
- Hydrogen Chloride
- Hydrogen Sulphide
- Iso-Butane
- Iso Butylene
- Krypton
- Methane
- Methyl Acetylene
- Methyl Bromide
- Methyl Chloride
- Methyl Mercaptan
- Mono Ethylamine
- Mono Methylamine
- Neon
- Nitric Oxide
- Nitrogen
- Nitrogen Dioxide
- Nitrous Oxide
- Oxygen
- Propane
- Propylene
- R-see Halocarbons
- Sulphur Hexafluoride
- Sulphur Dioxide
- Trimethylamine
- Vinyl Bromide
- Vinyl Chloride
- Xenon
Laboratory and Analysis
All products manufactured undergo full Quality Control assessment. Our Calibration Gas manufacturer has a dedicated laboratory for high precision reception control of raw materials and analysis and stability testing of finished products.
Certification
All PRIMARY and CERTIFIED mixtures are issued with a Certificate of Composition which shows:
- The mixture in terms of requested composition and actual certified composition.
- Mixture pressure, gas volume, mixture accuracy, valve type, conditions of storage and use.
- A statement denoting traceability.
- Our internal reference number and the customer order number.
- A clearly stated certified shelf life.
Traceability
All our products are traceable to the National Physical Laboratory or UKAS calibrated weights. If analysis is required we calibrate against UKAS, NPL or NIST gas standards.
Contact Us for further details.
Non-Refillable Cylinder Regulators
To complement our range of Non-Refillable Gas Cylinders we also offer a selection of regulators.
See Range -> Non-Refillable Cylinder Regulators