Nylon Tubing RPVC Tubing Clear PVC Tubing Black PVC Tubing PTFE Tubing PFA Tubing Smoothflex Hose
Vacuum and Pressure Hose Assemblies Quick Release Couplings Hose Clips

Vacuum and Pressure Hose
Assemblies

Flexible Hose & Quick Connectors > Vacuum and Pressure Hose Assemblies

VACUUM AND PRESSURE HOSE ASSEMBLIES

To download a PDF of the Vacuum & Pressure Hose Assemblies section (88kb) please click on the PDF icon - >

Ordering Information

End Connections Available:-

TA04 = S/S tube stub - 1/4" x 0.036" wall
TA06 = S/S tube stub - 3/8" x 0.036" wall
TA08 = S/S tube stub - 1/2" x 0.049" wall
TA12 = S/S tube stub - 3/4" x 0.065" wall
TA16 = S/S tube stub - 1" x 0.065" wall
TA6M = S/S tube stub - 6mm x 1.0mm wall
TA10M = S/S tube stub - 10mm x 1.0mm wall
TA12M = S/S tube stub - 12mm x 1.0mm wall

KF10 to KF50 (use ‘-KF25’ etc)
CF16 to CF250 (use ‘-CF63’ etc)
ISO63 to ISO250 (use ‘-ISO100’ etc)
1/4" to 1" male VCR swivel (use ‘-VM04’ etc)
1/4" to 1" female VCR swivel (use ‘-VF04’ etc)
1/8" to 1" male NPT thread (use ‘-NM04’ etc)
1/8" to 1" female NPT thread (use ‘-NF04’ etc)
1/8" to 1" male BSP Parallel thread (use ‘-PM04’ etc)
1/8" to 1" female BSP Parallel thread (use ‘-PF04’ etc)
1/8" to 1" male BSP Taper thread (use ‘-RM04’ etc)
1/8" to 1" female BSP Taper thread (use ‘-RF04’ etc)

PLEASE ASK FOR DETAILS OF OTHER CONFIGURATIONS REQUIRED

*Pressure Ratings - Without Braid

*Pressure Ratings - Single Braid

Hose I/D	Hose O/D	Bar @ 20oC	Static Bend Rad
6mm (0.25")	9.8mm	18	9mm
10mm (0.35")	16.2mm	6	14mm
12mm (0.50")	18.6mm	6	21mm
20mm (0.75")	28.3mm	2.2	32mm
25mm (1.0")	34.8mm	1.8	37mm

Hose I/D	Hose O/D	Bar @ 20oC	Static Bend Rad
6mm (0.25")	11.4mm	150	20mm
10mm (0.35")	17.8mm	115	20mm
12mm (0.50")	20.2mm	80	25mm
20mm (0.75")	29.9mm	55	38mm
25mm (1.0")	36.4mm	40	45mm

* Pressure ratings and bend radius info has been copied from manufacturers information & is presumed correct - we recommend that details are checked if there is a perceived safety issue when the item is in use.

SAFE COMPONENT SELECTION:

Hose assemblies have a finite life that is dependent on actual field service conditions. When selecting a component, the total system design must be considered to ensure safe, trouble-free performance. Component function material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibilities of the system design and user.

To download a PDF of the Vacuum & Pressure Hose Assemblies section (88kb) please click on the PDF icon - >

Flexible Hose & Quick Connectors > Vacuum and Pressure Hose Assemblies

t: 01892 669939 f: 01892 669594 Contact